Phil Industries builds ESD workbenches in Singapore — grounded anti-static workstations for electronics, semiconductor and precision-assembly work. Every bench carries a dissipative worksurface tested to ANSI/ESD S4.1, with grounding points for wrist straps, mats and tools. Because we fabricate locally, each bench is sized to your floor plan rather than to a catalogue page.
What makes a bench an ESD workbench
A workbench is not ESD-safe because it has a green top. It is ESD-safe because charge has a measured, verified path to earth, so three things must all be true.
- A dissipative worksurface — measured between 10⁶ and 10⁹ Ω, because a surface that drains too fast is a shock risk and one that drains too slowly is just furniture.
- A common-point ground — one bonding stud where the surface, the wrist strap and the shelf all meet, so nothing floats.
- A verified path to earth — through a 1 MΩ resistor for operator safety, and re-tested at intervals rather than assumed.
Options we build in
| Option | Why you would specify it |
|---|---|
| Height-adjustable frame | Shared benches across shifts, or seated/standing mix |
| Upper shelving and bin rails | Frees the worksurface; keeps small parts line-side |
| Integrated power and ESD sockets | Avoids trailing leads across the bench |
| Task lighting and magnifier | Inspection and rework stations |
| Drawers and under-bench storage | Tooling stays at the station |
| Custom width and depth | Awkward floor plans and tight Singapore units |
Frequently asked questions
What is an ESD workbench?
It is a workstation whose worksurface is static-dissipative and bonded to earth, so charge generated by the operator, the tools or the parts drains away in a controlled manner instead of discharging into a component.
Can I retrofit an existing bench instead?
Often yes. Fitting a dissipative mat and a common-point ground to a sound bench works well, and it costs less. However, if the frame is painted or the surface is worn, a purpose-built bench is more reliable in an audit.
Do you build to a custom size?
Yes — because the benches are fabricated here, we size them to your floor plan. Therefore send a sketch with the width, depth and any obstructions, and we will come back with a layout.
How do I get a quote?
WhatsApp us your floor plan and we will quote from it. Full specifications and options are shown under each product below.
How an ESD Workbench Protects Your Product
An ESD workbench gives every static-sensitive item a controlled path to ground. The dissipative worksurface is tested to ANSI/ESD S4.1, with a resistance to ground typically between 1×106 and 1×109 ohms, and the bench ties into your wider ESD-protected area under IEC/EN 61340-5-1 through common grounding points, wrist-strap snaps and a connection to equipment ground.
⚡ Dissipative worksurface
Laminate worksurface tested to ANSI/ESD S4.1, with edge trim and grounding snaps included.
🔗 Common ground points
One grounding point connects worksurface, wrist straps, mats and tools — compliant with IEC/EN 61340-5-1.
🛠 Custom-built to your space
Fabricated locally — sized to your floor plan, with shelving, lighting, power and height-adjustable frames.
🔧 Installed & supported
Supplied, installed and grounded on site anywhere in Singapore, with local after-sales support.
Who Uses These Benches
Semiconductor and electronics manufacturers, EMS and repair operations, laboratories and any ESD-protected area where static-sensitive components are built, inspected or tested.
ESD Workbench FAQs
What resistance should an ESD worksurface have?
Per ANSI/ESD S4.1 and IEC 61340-5-1, an ESD worksurface should have a resistance to ground below 1×109 ohms, typically in the 1×106 to 1×109 ohm range, so charge dissipates in a controlled way.
How is an ESD workbench grounded?
Through a common ground point that connects the worksurface, wrist straps, mats and tooling to equipment ground, forming part of the ESD-protected area under IEC/EN 61340-5-1.
Can you build benches to our size and layout?
Yes. We fabricate ESD workbenches locally and can size them to your space, add shelving, lighting and power, and install and ground them on site.
Do you install ESD workbenches across Singapore?
Yes — we supply, install and ground ESD workbenches across Singapore, with after-sales support.
Need a bench sized to your line?
Send us your floor plan and requirements — we’ll spec, fabricate and install it.
WhatsApp +65 9853 9030 Call +65 6555 1745