ESDpro Long ESD Table 2280mm (Height-Adjustable, Manual Screw)

Description

ESDpro Height-Adjustable ESD Table, 2280mm

This height-adjustable ESD table sets its worktop height by manual screw adjustment. Because there is no motor, there is nothing electrical to fail and nothing to service. Consequently, it suits plants that want adjustment without adding a maintenance item. Meanwhile, the 2280 mm top gives a long uninterrupted run.

Specifications

Firstly, the sizes above are what we hold as standard. However, anything outside that list is built to order. So if the bay is an awkward width, simply send us the dimension and we will quote to it.

What comes on the bench

• Manual screw height adjustment at each leg
• 2280 mm worktop for long assemblies or two operators
• Upper shelf that keeps instruments off the work area
• No electrics in the frame, so nothing to maintain

How to ground a height-adjustable ESD table

A bench only protects boards once you bond it to earth. In practice, you run a ground cord from the worktop to a common point ground. That point then ties back to the building’s equipment ground. Meanwhile, wrist straps and floor mats plug into the same point. As a result, the operator, the surface and the board all sit at one potential.

Afterwards, test the path with a resistance meter. Then re-test on the schedule your ESD programme sets. Both IEC 61340-5-1 and ANSI/ESD S20.20 cover how often. For a step-by-step version, see our guide on how to earth a workstation properly. Above all, do not assume a new bench arrives earthed — it does not.

Where a height-adjustable ESD table is used

Assembly and inspection benches shared across shifts by operators of different heights. Typically, a line sets the height once at installation and leaves it. Similarly, seated and standing stations can share one bench model. However, if you change height several times a day, ask us about powered options instead.

Common questions

Can I order a size that is not on the list?
Yes. Simply send us the worktop length and depth you need. Furthermore, we quote custom sizes at the same lead time as standard ones.

How much weight will it hold?
Between 100 kg and 300 kg, spread evenly across the top. However, the exact figure depends on the frame and worktop you pick. Therefore, tell us what you plan to put on it and we will confirm.

Why choose manual adjustment over electric?
Cost and reliability. Because a screw mechanism has no motor or controller, it does not fail mid-shift. Therefore, it makes sense where the height is set at installation rather than changed constantly.

Ordering from Phil Industries

ESDpro is our own brand. In other words, we specify it, we hold the stock at Ubi Avenue 1, and we handle the warranty ourselves. Consequently, no overseas factory sits between you and a replacement part. Meanwhile, you can browse the rest of the range under ESD workbenches. Call +65 6555 1745 or request a quote above.

Related pages in Singapore

• Browse all ESD Workbenches.
• Learn about ESDpro, our own ESD and cleanroom brand.
• Read our guides on setting up an ESD grounded workstation and ESD standards IEC 61340 and ANSI/ESD S20.20.

Phil Industries, the Singapore company behind the ESDpro brand, supplies this product with selection advice and after-sales support. Call +65 6555 1745, WhatsApp +65 9853 9030 or email sales@phil-industries.com.sg.