ESDpro Heavy-Duty ESD Bench

Description

ESDpro Heavy-Duty ESD Bench, Singapore

This heavy-duty ESD bench Singapore plants choose when the worktop carries real weight. Because the frame sits at the top of our load range, it takes jigs, fixtures and test racks rather than just hand tools. Furthermore, a perforated panel and drawers keep the surface clear. As a result, the bench stays usable when it is fully loaded.

Specifications

Firstly, the sizes above are what we hold as standard. However, anything outside that list is built to order. So if the bay is an awkward width, simply send us the dimension and we will quote to it.

What comes on the bench

• Heavy-duty frame at the 300 kg end of the range
• Perforated tool board for hooks and bins
• Upper shelf and drawers to keep weight off the worktop
• Dissipative worktop rated for static-sensitive work

How to ground a heavy-duty ESD bench

A bench only protects boards once you bond it to earth. In practice, you run a ground cord from the worktop to a common point ground. That point then ties back to the building’s equipment ground. Meanwhile, wrist straps and floor mats plug into the same point. As a result, the operator, the surface and the board all sit at one potential.

Afterwards, test the path with a resistance meter. Then re-test on the schedule your ESD programme sets. Both IEC 61340-5-1 and ANSI/ESD S20.20 cover how often. For a step-by-step version, see our guide on how to earth a workstation properly. Above all, do not assume a new bench arrives earthed — it does not.

Where a heavy-duty ESD bench in Singapore is used

Benches carrying test racks, fixtures, power supplies or heavy sub-assemblies. Typically, industrial electronics and equipment repair need this rather than a light table. Similarly, burn-in and environmental test stations suit it. However, do not over-specify if the bench only holds a soldering iron.

Common questions

Can I order a size that is not on the list?
Yes. Simply send us the worktop length and depth you need. Furthermore, we quote custom sizes at the same lead time as standard ones.

How much weight will it hold?
Between 100 kg and 300 kg, spread evenly across the top. However, the exact figure depends on the frame and worktop you pick. Therefore, tell us what you plan to put on it and we will confirm.

Is 300 kg the load for every bench in the range?
No. Across the line the figure runs from 100 kg to 300 kg. Because this is the heavy-duty model, it sits at the upper end. Therefore, always tell us the actual load.

Ordering from Phil Industries

ESDpro is our own brand. In other words, we specify it, we hold the stock at Ubi Avenue 1, and we handle the warranty ourselves. Consequently, no overseas factory sits between you and a replacement part. Meanwhile, you can browse the rest of the range under ESD workbenches. Call +65 6555 1745 or request a quote above.

Related pages in Singapore

• Browse all ESD Workbenches.
• Learn about ESDpro, our own ESD and cleanroom brand.
• Read our guides on setting up an ESD grounded workstation and ESD standards IEC 61340 and ANSI/ESD S20.20.

Phil Industries, the Singapore company behind the ESDpro brand, supplies this product with selection advice and after-sales support. Call +65 6555 1745, WhatsApp +65 9853 9030 or email sales@phil-industries.com.sg.