ESDpro SpaceLink Pro ESD Workbench Set (Modular)
The ESDpro SpaceLink Pro Set is a modular ESD workbench system — benches link together so a cell can be extended or re-laid out without replacing the frames.
- Sizes: standard 1200, 1500, 1800 and 2280 mm worktops, or built to your floor dimensions
- Load: 100–300 kg uniformly distributed, depending on the frame and worktop specified
- ESD worktop: dissipative surface, 106–109 Ω, groundable to your EPA earth for programmes run to ANSI/ESD S20.20 and IEC 61340-5-1
- Perforated tool panel: blue pegboard back panel takes tool hooks and small-parts bins
- Modular: height-adjustable frames, upper shelf and overhead lighting
- Our own brand: ESDpro is specified, stocked at Ubi and warranted by Phil Industries
- Description
- Reviews (0)
Description
ESDpro SpaceLink Pro Modular ESD Workbench Set
This is a modular ESD workbench set rather than a single bench. Because the frames link together, you extend a cell by adding a bay instead of replacing the line. Furthermore, each position keeps its own lighting, shelf and tool panel. As a result, a two-man cell grows to six without new frames.
Specifications
| Frame | Space-link extrusion, height-adjustable, linkable |
| Worktop | ESD dissipative laminate, 106–109 Ω |
| Standard sizes | 1200, 1500, 1800 or 2280 mm worktop; custom sizes built to order per bay |
| Load | 100–300 kg uniformly distributed, by frame and worktop |
| Tool panel | Blue perforated panel for hooks and small-parts bins |
| Lighting and shelf | Overhead light and upper shelf per bay |
| Brand | ESDpro — our own brand, warranted by Phil Industries |
Firstly, the sizes above are what we hold as standard. However, anything outside that list is built to order. So if the bay is an awkward width, simply send us the dimension and we will quote to it.
What comes on the bench
- Linkable bays, so the cell grows without a rebuild
- Perforated tool panel taking hooks and bins at every position
- Overhead lighting and upper shelf on each bay
- Height-adjustable frames across the whole set
How to ground a modular ESD workbench
A bench only protects boards once you bond it to earth. In practice, you run a ground cord from the worktop to a common point ground. That point then ties back to the building’s equipment ground. Meanwhile, wrist straps and floor mats plug into the same point. As a result, the operator, the surface and the board all sit at one potential.
Afterwards, test the path with a resistance meter. Then re-test on the schedule your ESD programme sets. Both IEC 61340-5-1 and ANSI/ESD S20.20 cover how often. For a step-by-step version, see our guide on how to earth a workstation properly. Above all, do not assume a new bench arrives earthed — it does not.
Where a modular ESD workbench set fits
Growing assembly cells, pilot lines and contract plants that re-lay out between programmes. Typically, buyers start with two bays and add more as volume climbs. Similarly, NPI areas suit it because nothing about the layout is permanent. However, a single fixed station does not need a modular set.
Common questions
Can I order a size that is not on the list?
Yes. Simply send us the worktop length and depth you need. Furthermore, we quote custom sizes at the same lead time as standard ones.
How much weight will it hold?
Between 100 kg and 300 kg, spread evenly across the top. However, the exact figure depends on the frame and worktop you pick. Therefore, tell us what you plan to put on it and we will confirm.
Can we buy two bays now and add more later?
Yes, and that is the point of it. Because the frames are a stock system, later bays match the originals. Therefore, order what you need today and extend when the volume arrives.
Ordering from Phil Industries
ESDpro is our own brand. In other words, we specify it, we hold the stock at Ubi Avenue 1, and we handle the warranty ourselves. Consequently, no overseas factory sits between you and a replacement part. Meanwhile, you can browse the rest of the range under ESD workbenches. Call +65 6555 1745 or request a quote above.
Related pages in Singapore
- Browse all ESD Workbenches.
- Learn about ESDpro, our own ESD and cleanroom brand.
- Read our guides on setting up an ESD grounded workstation and ESD standards IEC 61340 and ANSI/ESD S20.20.
Phil Industries, the Singapore company behind the ESDpro brand, supplies this product with selection advice and after-sales support. Call +65 6555 1745, WhatsApp +65 9853 9030 or email sales@phil-industries.com.sg.
Reviews
There are no reviews yet.