ESDpro Long ESD Table 2280mm

Description

ESDpro Long ESD Table 2280mm

The long ESD table 2280mm gives one continuous worksurface with no centre leg in the way. Because nothing breaks the run, large boards and long assemblies lie flat. Furthermore, two operators can share the bench comfortably. Meanwhile, the dissipative top handles static across the whole length.

Specifications

Firstly, the sizes above are what we hold as standard. However, anything outside that list is built to order. So if the bay is an awkward width, simply send us the dimension and we will quote to it.

What comes on the bench

• 2280 mm continuous worktop with no centre leg
• Room for two operators or one long assembly
• Dissipative surface across the full length
• Steel frame rated for the same 100–300 kg range as the rest of the line

How to ground a long ESD table

A bench only protects boards once you bond it to earth. In practice, you run a ground cord from the worktop to a common point ground. That point then ties back to the building’s equipment ground. Meanwhile, wrist straps and floor mats plug into the same point. As a result, the operator, the surface and the board all sit at one potential.

Afterwards, test the path with a resistance meter. Then re-test on the schedule your ESD programme sets. Both IEC 61340-5-1 and ANSI/ESD S20.20 cover how often. For a step-by-step version, see our guide on how to earth a workstation properly. Above all, do not assume a new bench arrives earthed — it does not.

Where a long ESD table 2280mm is used

Backplane and large-PCB assembly, multi-instrument test setups and cable harness work. Typically, plants buy it when boards have outgrown a standard 1500 mm bench. Similarly, calibration benches with several instruments benefit from the length. However, for a small rework station it is more table than you need.

Common questions

Can I order a size that is not on the list?
Yes. Simply send us the worktop length and depth you need. Furthermore, we quote custom sizes at the same lead time as standard ones.

How much weight will it hold?
Between 100 kg and 300 kg, spread evenly across the top. However, the exact figure depends on the frame and worktop you pick. Therefore, tell us what you plan to put on it and we will confirm.

Is 2280 mm the only length?
No. It is the long option, and we stock 1200, 1500 and 1800 mm as well. Furthermore, we build to your dimension if none of those fit the bay.

Ordering from Phil Industries

ESDpro is our own brand. In other words, we specify it, we hold the stock at Ubi Avenue 1, and we handle the warranty ourselves. Consequently, no overseas factory sits between you and a replacement part. Meanwhile, you can browse the rest of the range under ESD workbenches. Call +65 6555 1745 or request a quote above.

Related pages in Singapore

• Browse all ESD Workbenches.
• Learn about ESDpro, our own ESD and cleanroom brand.
• Read our guides on setting up an ESD grounded workstation and ESD standards IEC 61340 and ANSI/ESD S20.20.

Phil Industries, the Singapore company behind the ESDpro brand, supplies this product with selection advice and after-sales support. Call +65 6555 1745, WhatsApp +65 9853 9030 or email sales@phil-industries.com.sg.