ESDpro Anti-Static Workbench Setup (Assembly & Test)

Description

ESDpro Antistatic Workbench Setup, Singapore

This antistatic workbench Singapore assembly and test lines use when the operator needs a screen, tools and parts within one reach. Because the monitor mounts to the frame, it stops eating worktop. Furthermore, the perforated backboard takes hooks and bins. Meanwhile, drawers hold what should not sit out.

Specifications

Firstly, the sizes above are what we hold as standard. However, anything outside that list is built to order. So if the bay is an awkward width, simply send us the dimension and we will quote to it.

What comes on the bench

• Monitor mount on the frame, which frees the worktop
• Large perforated backboard for hooks and small-parts bins
• Overhead lighting over the work zone
• Drawer storage for tools and consumables

How to ground an antistatic workbench

A bench only protects boards once you bond it to earth. In practice, you run a ground cord from the worktop to a common point ground. That point then ties back to the building’s equipment ground. Meanwhile, wrist straps and floor mats plug into the same point. As a result, the operator, the surface and the board all sit at one potential.

Afterwards, test the path with a resistance meter. Then re-test on the schedule your ESD programme sets. Both IEC 61340-5-1 and ANSI/ESD S20.20 cover how often. For a step-by-step version, see our guide on how to earth a workstation properly. Above all, do not assume a new bench arrives earthed — it does not.

Where this antistatic workbench in Singapore is used

Assembly and functional test where the operator works to an on-screen procedure. Typically, that means test stations, ICT and any bench running a work-instruction terminal. Similarly, programming and flashing stations suit it. However, a paper-instruction bench does not need the monitor arm.

Common questions

Can I order a size that is not on the list?
Yes. Simply send us the worktop length and depth you need. Furthermore, we quote custom sizes at the same lead time as standard ones.

How much weight will it hold?
Between 100 kg and 300 kg, spread evenly across the top. However, the exact figure depends on the frame and worktop you pick. Therefore, tell us what you plan to put on it and we will confirm.

Will it take our existing monitor?
Send us the monitor model and we will confirm the mount before you order. Because screen fixings vary, we would rather check than assume. Furthermore, we can supply the arm separately if yours does not fit.

Ordering from Phil Industries

ESDpro is our own brand. In other words, we specify it, we hold the stock at Ubi Avenue 1, and we handle the warranty ourselves. Consequently, no overseas factory sits between you and a replacement part. Meanwhile, you can browse the rest of the range under ESD workbenches. Call +65 6555 1745 or request a quote above.

Related pages in Singapore

• Browse all ESD Workbenches.
• Learn about ESDpro, our own ESD and cleanroom brand.
• Read our guides on setting up an ESD grounded workstation and ESD standards IEC 61340 and ANSI/ESD S20.20.

Phil Industries, the Singapore company behind the ESDpro brand, supplies this product with selection advice and after-sales support. Call +65 6555 1745, WhatsApp +65 9853 9030 or email sales@phil-industries.com.sg.