ESDpro ESD Workbench with Integrated Conveyor
The ESDpro ESD workbench with conveyor is a production-line workstation with an integrated conveyor section, so assemblies move between operators without leaving the EPA.
- Sizes: standard 1200, 1500, 1800 and 2280 mm worktops, or built to your floor dimensions
- Load: 100–300 kg uniformly distributed, depending on the frame and worktop specified
- ESD worktop: dissipative surface, 106–109 Ω, groundable to your EPA earth for programmes run to ANSI/ESD S20.20 and IEC 61340-5-1
- Conveyor section built into the bench run, with an upper shelf above the work zone
- Our own brand: ESDpro is specified, stocked at Ubi and warranted by Phil Industries
- Description
- Reviews (0)
Description
ESDpro ESD Workbench with Conveyor
This ESD workbench with conveyor puts a belt line straight through the bench. Consequently, assemblies move to the next operator without anyone lifting them. The whole run stays inside the EPA. Meanwhile, the overhead frame carries shelving for tools and test gear above the work zone.
Specifications
| Frame | Heavy-duty steel, sized for the conveyor load |
| Worktop | ESD dissipative laminate, 106–109 Ω |
| Standard sizes | 1200, 1500, 1800 or 2280 mm worktop; custom sizes built to order |
| Load | 100–300 kg uniformly distributed, by frame and worktop |
| Conveyor | Integrated belt section running through the bench |
| Overhead frame | Yes, with shelving above the worksurface |
| Brand | ESDpro — our own brand, warranted by Phil Industries |
Firstly, the sizes above are what we hold as standard. However, anything outside that list is built to order. So if the bay is an awkward width, simply send us the dimension and we will quote to it.
What comes on the bench
- Integrated conveyor section, so boards never leave the protected area
- Overhead frame and shelving for tools and instruments
- Heavy-duty steel base that holds the belt line steady
- Dissipative worktop either side of the conveyor run
How to ground an ESD workbench with conveyor
A bench only protects boards once you bond it to earth. In practice, you run a ground cord from the worktop to a common point ground. That point then ties back to the building’s equipment ground. Meanwhile, wrist straps and floor mats plug into the same point. As a result, the operator, the surface and the board all sit at one potential.
Afterwards, test the path with a resistance meter. Then re-test on the schedule your ESD programme sets. Both IEC 61340-5-1 and ANSI/ESD S20.20 cover how often. For a step-by-step version, see our guide on how to earth a workstation properly. Above all, do not assume a new bench arrives earthed — it does not.
Where an ESD workbench with conveyor earns its place
High-volume assembly, SMT lines and any flow where boards pass hand to hand. Typically, plants choose it when carrying trays between benches has become the bottleneck. For example, a burn-in line moving boards to test benefits immediately. However, single-station rework does not need a conveyor at all.
Common questions
Can I order a size that is not on the list?
Yes. Simply send us the worktop length and depth you need. Furthermore, we quote custom sizes at the same lead time as standard ones.
How much weight will it hold?
Between 100 kg and 300 kg, spread evenly across the top. However, the exact figure depends on the frame and worktop you pick. Therefore, tell us what you plan to put on it and we will confirm.
Can the conveyor be added to a bench we already own?
Usually not. Because the frame is sized for the belt load, the conveyor version is built as one unit. Therefore, tell us the line layout and we will quote the run rather than a single bench.
Ordering from Phil Industries
ESDpro is our own brand. In other words, we specify it, we hold the stock at Ubi Avenue 1, and we handle the warranty ourselves. Consequently, no overseas factory sits between you and a replacement part. Meanwhile, you can browse the rest of the range under ESD workbenches. Call +65 6555 1745 or request a quote above.
Related pages in Singapore
- Browse all ESD Workbenches.
- Learn about ESDpro, our own ESD and cleanroom brand.
- Read our guides on setting up an ESD grounded workstation and ESD standards IEC 61340 and ANSI/ESD S20.20.
Phil Industries, the Singapore company behind the ESDpro brand, supplies this product with selection advice and after-sales support. Call +65 6555 1745, WhatsApp +65 9853 9030 or email sales@phil-industries.com.sg.
Reviews
There are no reviews yet.