ESDpro ESD Electronics Workshop Bench (Complete Setup)
The ESDpro ESD workshop bench is a complete electronics workshop station — tool panel, lighting, shelf and drawers supplied together rather than specified piece by piece.
- Sizes: standard 1200, 1500, 1800 and 2280 mm worktops, or built to your floor dimensions
- Load: 100–300 kg uniformly distributed, depending on the frame and worktop specified
- ESD worktop: dissipative surface, 106–109 Ω, groundable to your EPA earth for programmes run to ANSI/ESD S20.20 and IEC 61340-5-1
- Perforated tool panel: blue pegboard back panel takes tool hooks and small-parts bins
- Complete setup: overhead lighting, upper shelf and drawer storage included
- Our own brand: ESDpro is specified, stocked at Ubi and warranted by Phil Industries
- Description
- Reviews (0)
Description
ESDpro ESD Workshop Bench, Complete Setup
This ESD workshop bench arrives as a complete station rather than a frame you then fit out. Because the tool panel, lighting, shelf and drawers all come together, nothing is specified twice. Consequently, the bench works on day one. Meanwhile, the dissipative worktop protects whatever sits on it.
Specifications
| Frame | Steel, workshop duty |
| Worktop | ESD dissipative laminate, 106–109 Ω |
| Standard sizes | 1200, 1500, 1800 or 2280 mm worktop; custom sizes built to order |
| Load | 100–300 kg uniformly distributed, by frame and worktop |
| Tool panel | Blue perforated panel with hooks |
| Lighting and storage | Overhead light, upper shelf, drawer unit |
| Brand | ESDpro — our own brand, warranted by Phil Industries |
Firstly, the sizes above are what we hold as standard. However, anything outside that list is built to order. So if the bay is an awkward width, simply send us the dimension and we will quote to it.
What comes on the bench
- Perforated tool panel for hooks and small-parts bins
- Overhead lighting over the work zone
- Upper shelf for instruments and stock
- Drawer storage under the worktop
- Supplied complete, so there is no second order for accessories
How to ground an ESD workshop bench
A bench only protects boards once you bond it to earth. In practice, you run a ground cord from the worktop to a common point ground. That point then ties back to the building’s equipment ground. Meanwhile, wrist straps and floor mats plug into the same point. As a result, the operator, the surface and the board all sit at one potential.
Afterwards, test the path with a resistance meter. Then re-test on the schedule your ESD programme sets. Both IEC 61340-5-1 and ANSI/ESD S20.20 cover how often. For a step-by-step version, see our guide on how to earth a workstation properly. Above all, do not assume a new bench arrives earthed — it does not.
Where an ESD workshop bench is used
Electronics workshops, repair benches and maintenance rooms. Typically, one or two of these serve a whole department. Similarly, service centres use them as the standard bench. However, a production line usually wants a leaner bench repeated many times.
Common questions
Can I order a size that is not on the list?
Yes. Simply send us the worktop length and depth you need. Furthermore, we quote custom sizes at the same lead time as standard ones.
How much weight will it hold?
Between 100 kg and 300 kg, spread evenly across the top. However, the exact figure depends on the frame and worktop you pick. Therefore, tell us what you plan to put on it and we will confirm.
What does “complete setup” actually include?
Tool panel, overhead lighting, upper shelf and drawers on an ESD worktop. Furthermore, we will confirm the exact list on the quotation, so nothing is assumed either way.
Ordering from Phil Industries
ESDpro is our own brand. In other words, we specify it, we hold the stock at Ubi Avenue 1, and we handle the warranty ourselves. Consequently, no overseas factory sits between you and a replacement part. Meanwhile, you can browse the rest of the range under ESD workbenches. Call +65 6555 1745 or request a quote above.
Related pages in Singapore
- Browse all ESD Workbenches.
- Learn about ESDpro, our own ESD and cleanroom brand.
- Read our guides on setting up an ESD grounded workstation and ESD standards IEC 61340 and ANSI/ESD S20.20.
Phil Industries, the Singapore company behind the ESDpro brand, supplies this product with selection advice and after-sales support. Call +65 6555 1745, WhatsApp +65 9853 9030 or email sales@phil-industries.com.sg.
Reviews
There are no reviews yet.