ESDpro Ergonomic ESD Safe Workstation

Description

ESDpro Ergonomic ESD Workstation, Singapore

This ergonomic ESD workstation Singapore plants use for long-shift assembly work. Because height adjusts and the light sits overhead, operators are not working around the bench. Furthermore, the upper shelf keeps instruments off the worktop. As a result, posture and clutter both improve on a full shift.

Specifications

Firstly, the sizes above are what we hold as standard. However, anything outside that list is built to order. So if the bay is an awkward width, simply send us the dimension and we will quote to it.

What comes on the bench

• Adjustable working height for seated or standing operators
• Overhead lighting that removes shadow from the work area
• Upper shelf so the worktop stays clear
• Dissipative worktop groundable to your EPA earth

Grounding an ESD workstation in Singapore

A bench only protects boards once you bond it to earth. In practice, you run a ground cord from the worktop to a common point ground. That point then ties back to the building’s equipment ground. Meanwhile, wrist straps and floor mats plug into the same point. As a result, the operator, the surface and the board all sit at one potential.

Afterwards, test the path with a resistance meter. Then re-test on the schedule your ESD programme sets. Both IEC 61340-5-1 and ANSI/ESD S20.20 cover how often. For a step-by-step version, see our guide on how to earth a workstation properly. Above all, do not assume a new bench arrives earthed — it does not.

Where this ESD workstation in Singapore is used

Assembly, test and inspection stations worked for a full shift. Typically, plants specify it after operators report fatigue or neck strain. Similarly, mixed-height teams benefit from adjustment. However, an occasional-use bench does not justify the extra cost.

Common questions

Can I order a size that is not on the list?
Yes. Simply send us the worktop length and depth you need. Furthermore, we quote custom sizes at the same lead time as standard ones.

How much weight will it hold?
Between 100 kg and 300 kg, spread evenly across the top. However, the exact figure depends on the frame and worktop you pick. Therefore, tell us what you plan to put on it and we will confirm.

Does an ergonomic bench really cut errors?
Posture and lighting affect how long an operator can hold fine-pitch accuracy. Therefore, we would rather specify the bench around the shift pattern than sell you the cheapest frame.

Ordering from Phil Industries

ESDpro is our own brand. In other words, we specify it, we hold the stock at Ubi Avenue 1, and we handle the warranty ourselves. Consequently, no overseas factory sits between you and a replacement part. Meanwhile, you can browse the rest of the range under ESD workbenches. Call +65 6555 1745 or request a quote above.

Related pages in Singapore

• Browse all ESD Workbenches.
• Learn about ESDpro, our own ESD and cleanroom brand.
• Read our guides on setting up an ESD grounded workstation and ESD standards IEC 61340 and ANSI/ESD S20.20.

Phil Industries, the Singapore company behind the ESDpro brand, supplies this product with selection advice and after-sales support. Call +65 6555 1745, WhatsApp +65 9853 9030 or email sales@phil-industries.com.sg.