A field service ESD kit in Singapore is essential gear. It protects any technician who services electronics outside a controlled bench. A laptop opens in a server room. A medical scanner is unbolted in a hospital. A semiconductor tool is repaired on a customer floor. In each case, static charge is the silent risk. One careless touch can ruin an expensive board.
The Atrix Field Service ESD Kit (ATIESD-1CPGS) solves this. Supplied by Phil Industries, it gives every technician a fold-out workstation in a pouch. This guide explains why a portable ESD kit belongs in every service vehicle. We also show how the ATIESD-1CPGS protects sensitive electronics in the field.
Why Field Service Needs a Dedicated ESD Kit
In-factory benches in Singapore are usually fully ESD-controlled. Field service is the opposite. A technician visits a data centre, a hospital workshop or a customer factory. They rarely find a grounded mat. They rarely find a wrist strap point. They rarely find guaranteed earth bonding. Yet the work is the same as bench work. They open a chassis. They swap a board. They reseat a module. Without portable ESD protection, every visit is a roll of the dice.
The ATIESD-1CPGS solves this. It folds out into a static-dissipative work mat. The mat has an integrated common-point ground. The technician adds the wrist strap. They clip the coil cord to the mat. They bond the ground cord to the chassis or earth. Within seconds, the engineer has a controlled work surface. It meets ESD best practice anywhere across Singapore and SEA.
Where the ATIESD-1CPGS Belongs in Singapore Service Operations
Data Centre & IT Field Service
Server boards, storage controllers and network gear are highly static-sensitive. The ATIESD-1CPGS gives data centre engineers a grounded surface for board swaps inside live racks across Singapore data parks.
Medical & Lab Equipment Repair
Hospital biomedical and clinical lab teams service expensive electronics under tight uptime targets. A portable ESD kit prevents costly board failures during on-site repairs in Singapore and SEA hospitals.
Semiconductor Tool Support
Field engineers visiting fabs need ESD protection that meets host-site expectations. A common-point grounded fold-out mat fits the SOP of most Singapore semiconductor customers.
Industrial Controls & Automation
PLCs, drives and HMI modules are vulnerable when serviced in plant cabinets. The kit provides a clean, grounded workstation right next to the panel — no improvising on a metal toolbox lid.
What Is Inside the ATIESD-1CPGS Field Service ESD Kit
The Atrix ATIESD-1CPGS is designed to be the smallest credible ESD station a technician can carry. Each kit folds into a pouch and contains everything needed to set up a compliant work area.
- Foldable static-dissipative work mat with snap closure
- Common-point grounding system built into the mat
- Adjustable wrist strap with coil cord
- Ground cord with alligator clip for chassis or earth bonding
- Storage pouch sized for service tool bags
The kit is ideal for SEA field engineers servicing semiconductor, electronics and medical equipment, and pairs cleanly with the rest of the Atrix ESD range including ESD-safe vacuums and antistatic brushes.
How to Choose a Field Service ESD Kit in Singapore
When you select a field service ESD kit in Singapore, follow a few simple rules. First, look for a common-point ground built into the mat. A separate snap fitting can be left at the office. Second, confirm the mat is static-dissipative and durable. It should survive repeated folding. Third, check the wrist strap is adjustable. Fourth, verify the ground cord clip fits common chassis points. Phil Industries is the authorised Atrix distributor in Singapore. We stock the ATIESD-1CPGS with full accessory support.
Frequently Asked Questions
What is included in the ATIESD-1CPGS field service ESD kit?
The kit includes a foldable static-dissipative work mat with a common-point ground, an adjustable wrist strap with coil cord, a ground cord with alligator clip and a storage pouch — everything needed to set up a portable grounded workstation.
Is the ATIESD-1CPGS suitable for medical and semiconductor field work?
Yes. The kit is widely used by SEA field engineers servicing semiconductor tools, medical and lab equipment, data centre hardware and industrial controls where ESD protection is required on customer sites.
How does the common-point ground work?
The mat integrates a common-point ground that both the wrist strap and the ground cord connect to. The ground cord then bonds to a chassis point or verified earth, putting the technician and the work surface at the same potential.
Where can I buy the ATIESD-1CPGS in Singapore?
Phil Industries is the authorised Atrix distributor in Singapore. We supply the ATIESD-1CPGS kit and its accessories across Singapore, Malaysia, Indonesia, Thailand and Vietnam.
Equip Your Field Service Team with Reliable ESD Protection
Phil Industries supplies the Atrix ATIESD-1CPGS Field Service ESD Kit with fast delivery across Singapore and SEA. Contact us for pricing and volume orders.
