19Aug
17Aug
How to Test an ESD Wrist Strap (and How Often)
A wrist strap only protects your boards if the path to ground is intact. Here is how to test an ESD wrist strap, how often, and what a failed test really means.
15Aug
ESD Matting Guide (Singapore): Bench Mats, Floor Mats & Grounding
How to choose an ESD mat in Singapore — bench vs floor, rubber vs vinyl, surface resistance, anti-fatigue mats, and how to ground one properly.
03Aug
ESD Mat Guide: Bench, Floor and Anti-Fatigue Matting in Singapore
An ESD mat only works when it is bonded to earth. This guide covers bench, floor and anti-fatigue ESD matting, conductive vs dissipative surfaces, layout and testing for Singapore facilities.
30Jul
ESD Standards Explained: IEC 61340-5-1 vs ANSI/ESD S20.20
A plain-English comparison of the two ESD standards, the resistance limits your EPA must meet, how often to test, and which one applies in Singapore.
21Jul
ESD Grounding Explained: How to Earth a Workstation Properly in Singapore
ESD grounding gives static charge a safe path to earth before it reaches a sensitive component. Yet many Singapore workbenches get it half right. This guide walks through a complete setup, one part at a time. Reviewed September 2026 by the Phil Industries engineering team, Singapore....
21Jul
ESD Storage Box Buyer’s Guide: Boxes, Bins & Trays for Singapore Production Lines
An ESD storage box protects components between process steps. However, the wrong box quietly does the opposite. This guide shows Singapore production and stores teams how to pick the right one. Reviewed September 2026 by the Phil Industries engineering team, Singapore. Products mentioned are stocked at...
17Jul
What Is an ESD Vacuum? A Guide for Electronics Manufacturing Teams
This practical guide is for technicians and junior engineers in electronics manufacturing. It covers three things: why an ordinary vacuum is a static hazard, what "ESD safe" really means on a vacuum, and how to pick the right filtration level for toner, dust and cleanroom...
30Jun
Anti-Static vs Static-Shielding Bags: The ESD Packaging Mistake That Damages Class 0 Components
The pink anti-static bag is one of the most misunderstood products in electronics manufacturing. For components rated HBM Class 0, it provides essentially no protection against the damage mechanism that matters.
15Jun