Mountz Mini RDA – Run Down Adapters
Mountz mini run-down adapters (RDA) are designed to be used with low torque sensors to provide consistent and reliable torque readings for power-driven torque control tools. Run down adapters are used to simulate various joint characteristics to provide a more accurate torque reading during testing and calibration.
Mini RDAs allow for an accurate simulation of actual joints. Run-down adapters are mounted in-line between the tool drive and the transducer of a torque analyzer or sensor, reducing the impact and irregular peaks that cause poor testing repeatability.
Mini RDAs are designed for use with Mountz torque analyzers and Mountz BMX20z – BMX10i and MTX low torque sensors.
Accurate Power Tool Testing
- Provide consistent and reliable torque readings for power-driven torque control tools.
- RDA is mounted in-line between the tool drive and the transducer of a torque analyzer or sensor.
- Compact to limit spacing between the power tool and torque measurement equipment for improved accuracy and ease of use.
- Operates in a clockwise direction only. After each run down, the RDA should be backed-up.
- Description
- Reviews (0)
Description
CHOOSE THE MODEL BELOW
| Model | Item Name / Number | Screws | |
|---|---|---|---|
 |
Mini RDA2 | 061229-2 | PH Phil 2-56 x 1/4 SS |
 |
Mini RDA4 | 061229-4 | PH Phil 4-40 x 1/4 SS |
 |
Mini RDA6 | 061229-6 | PH Phil 6-32 x 1/4 SS |
 |
Mini RDA10 | 061229-10 | SKT Head 5-32 x 1/4 SS |
CHOOSE THE MODEL BELOW
table {
width: auto;
border-collapse: collapse;
margin-bottom: 1rem;
font-family: Arial, sans-serif;
font-size: 14px;
}
table td, table th {
border: 3px solid #222;
padding: 10px 14px;
vertical-align: top;
}
.p_name {
font-weight: bold;
background: #e9e9e9;
white-space: nowrap;
}
.p_attribute {
background: #fff;
}
| Model: | Socket Head Power Bits 1/20 x 2″ |
| Item Name / Number: | 121039 |
| Bit Hex Size: | 1/20″ |
| Bit Length(IN): | 2″ |
| Package Quantity |
Accurate Power Tool Testing:
- Designed to provide consistent and reliable torque readings for use with low torque power tools.
- The mini RDAs allow a close simulation of actual joints.
- RDA is mounted in-line between the tool drive and the transducer of a torque analyzer or sensor.
- Operates in a clockwise direction only. After each run down, the RDA should be completely backed up
- The kit includes 5 mini RDA units along with 10 fasteners.
Designed for use with Mountz torque measurement equipment, including LTT torque analyzers and BMX20z – BMX10i and MTX torque sensors.
FAQ for Mini Run Down Adapters As an authorised Mountz distributor in Singapore, Phil Industries supplies the full Mountz torque tool range with product advice and after-sales support.
Reviews
There are no reviews yet.