Cleanroom Stainless Steel Bench – Slim Wall-Side Table with Square Legs
Slim stainless steel bench on square legs, built to sit flush against cleanroom partitions or beside equipment. Made to length and depth in Singapore; ideal as a writing, labelling or staging surface.
- Description
- Reviews (0)
Description
A cleanroom stainless steel bench does not always need to be deep. In many rooms, the useful surface is a narrow bench against a partition wall: somewhere to write a label, stage a tray or set down a tool without walking back to a main workstation. This slim bench uses square stainless steel legs and a flat top with folded edges, so it sits flush to the wall and therefore leaves the walkway clear.
What makes this bench right for a cleanroom
- Slim depth: typically 400–500 mm, so it fits between equipment and the partition without narrowing the aisle.
- Square legs, no lower rail: as a result, the floor below stays open for cleaning and for cable trays.
- Stainless throughout: because there is no paint or particleboard, nothing sheds, and the bench wipes down with IPA.
- Made to size: in addition, we match the length to the wall bay and the height to the operator or the adjacent equipment.
Typical specification of this cleanroom stainless steel bench
| Item | Standard build | Options |
|---|---|---|
| Top | Flat stainless steel sheet, so the edges fold under with no sharp lip | For example, an upstand at the wall or a cable slot |
| Legs | Square stainless steel tube, four legs | Alternatively, wall brackets, a lower rail or an undershelf |
| Feet | Adjustable levelling feet | For example, conductive feet for ESD floors |
| Grade | SUS304 as standard | Alternatively, SUS316 |
We confirm gauge, grade and dimensions on the quotation, so send us the wall bay size.
Fits alongside your other cleanroom furniture
Customers usually order this bench together with main workstations, gowning benches and trolleys, so that finishes match. For example, see the stainless steel workbench, the stainless steel gowning bench and the rest of our cleanroom furniture. For ESD-protected areas, in addition, add an ESD mat and grounding.
Frequently asked questions about the cleanroom stainless steel bench
Can the bench be fixed to the wall?
Yes. Where the partition can take the load, we supply wall brackets in place of the rear legs, so the floor stays completely clear.
What depth do you recommend?
For a writing or staging surface, 400–500 mm works well; however, for a bench that will hold equipment, go to 600 mm or more.
How do I get a quotation?
First, send the wall length, depth, height and quantity to WhatsApp +65 9853 9030 or email; then we quote the same working day.
Reviews
There are no reviews yet.