STC30 Plus Transforme
The STC30 Plus is a power supply that operates with select Mountz electric screwdrivers. It is a single tool controller that is designed to operate at both 110v and 230v. Switchable output voltage provides two selectable speed options on screwdrivers. The unit is can connect with the Scout screw counting system.
Specs:
Model:STC30 Plus
Item #:145683
Tool Weight:1.8 lbs.
Tool Length:7.5
Tool Width:4.375
Tool Height:2.375
Rated Output:2.5A
Maximum Output:5A
Output VDC:20/30V or 30/38V
Input VAC:110/230V
Fuse Size:6.3A
- Description
Description
CHOOSE THE MODEL BELOW
| Model | Driver Type | Item Name / Number | 110V | American | S.I. | Drive Size | |
|---|---|---|---|---|---|---|---|
 |
VB1510 | Lever Start | 144280 | T | 2.2 – 13 lbf.in | 25 – 150 cN.m | 1/4″ F/Hex |
 |
VB1510PS | Push-to-Start | 144281 | T | 2.2 – 13 lbf.in | 25 – 150 cN.m | 1/4″ F/Hex |
 |
VB1820 | Lever Start | 144282 | T | 3.5 – 16 lbf.in | 40 – 180 cN.m | 1/4″ F/Hex |
 |
VB1820PS | Push-to-Start | 144283 | T | 3.5 – 16 lbf.in | 40 – 180 cN.m | 1/4″ F/Hex |
|
VB3012 | Lever Start | 144284 | T | 4.3 – 26 lbf.in | 50 – 300 cN.m | 1/4″ F/Hex |
|
VB3012PS | Push-to-Start | 144285 | T | 4.3 – 26 lbf.in | 50 – 300 cN.m | 1/4″ F/Hex |
|
VB4504 | Lever Start | 144286 | T | 8.7 – 39 lbf.in | 100 – 450 cN.m | 1/4″ F/Hex |
|
VB4504PS | Push-to-Start | 144287 | T | 8.7 – 39 lbf.in | 100 – 450 cN.m | 1/4″ F/Hex |
CHOOSE THE MODEL BELOW
| Model: | Socket Head Power Bits 1/20 x 2″ |
| Item Name / Number: | 121039 |
| Bit Hex Size: | 1/20″ |
| Bit Length(IN): | 2″ |
| Package Quantity |
- Selectable output voltage
- Over Heat Protection (OHP) and Over Current Protection (OCP) protect drivers from damage or malfunction.
- Temperature Detection powers down the unit and resets automatically when the unit restores to acceptable levels.
- Switchable 110V & 230V input voltage. The unit will reset itself if motor/current overload is too high
- Start & Stop Signal Output (for PLC).
- Selectable Soft-Start time (from 0.2-0.6 seconds).
- Selectable Double Hit Mode for soft joint applications.
- Screwdriver Lock Signal Input (for PLC).
- The unit can be connected to the Scout Screw Counter
Tailored Industrial Support with Quality Products and Expert Guidance.
Our solutions will reduce your bottle necks and improve your efficiency and productivity, contact us now and let us know how we can help you, we are always here!